陳坤盛 | Kuen-Suan Chen
姓名 陳坤盛 | Kuen-Suan Chen
系所 經營管理學系 兼任講座教授
經歷 .國立勤益科技大學工業工程與管理系特聘教授
.國立勤益科技大學校長
.美國聖地牙哥大學數學與電腦科學系訪問學者
年度 論文名稱
2022 陳坤盛(Kun-Sheng Chen), Product quality evaluation by confidence intervals of process yield index, Scientific Reports
2022 陳坤盛(Kun-Sheng Chen)*, Fuzzy testing of operating performance index based on confidence intervals, ANNALS OF OPERATIONS RESEARCH
2022 陳坤盛(Kun-Sheng Chen), Multiple manufacturing processing target value setting model - A case study on grinding and polishing processes of the electric vehicle motor shaft, JOURNAL OF TESTING AND EVALUATION
2022 陳坤盛(Kun-Sheng Chen), Novel physical fitness fuzzy evaluation model for Individual Health Promotion, International Journal of Environmental Research and Public Health
2022 Chen, T.、陳坤盛(Kun-Sheng Chen)*, A fuzzy improvement testing model of bank APP performance, Mathematics
2022 Yu, C. M、陳坤盛(Kun-Sheng Chen)*, Confidence-interval-based fuzzy testing for the lifetime performance index of electronic product, Mathematics
2022 陳坤盛(Kun-Sheng Chen)、Yu, C. M.(Yu, C. M.)*, Lifetime performance evaluation and analysis model of passive component capacitor products, ANNALS OF OPERATIONS RESEARCH
2022 Yu, C. M、陳坤盛(Kun-Sheng Chen)*, Construct Six Sigma DMAIC improvement model for manufacturing process quality of multi-characteristic products, Mathematics
2022 Chiou, K. C.、陳坤盛(Kun-Sheng Chen)*, Lifetime performance evaluation model based on quick response thinking, Eksploatacja i Niezawodnosc-Maintenance and Reliability, vol.24 no.1 pp.1-6
2021 Yu, C. M.、Wu, C. F.、陳坤盛(Kun-Sheng Chen)*、許昌賢(Chang-Hsien Hsu), Fuzzy quality evaluation model constructed by process quality index, Applied Sciences-Basel, vol.11 no.23 pp.11262-
2021 Chen, T.、Yang, C. M.、陳坤盛(Kun-Sheng Chen)*、Hsu, T. H., Fuzzy evaluation model of bank APP performance based on circular economy thinking, Mathematics, vol.9 no.21 pp.2761-
2021 Yang, C. M.、陳坤盛(Kun-Sheng Chen)*, An integrated contract manufacturer selection and product quality optimization methodology for the mechanical manufacturing industry, EXPERT SYSTEMS WITH APPLICATIONS, vol.183 pp.115336-
2021 Yu, C. M.、陳坤盛(Kun-Sheng Chen)*、Guo, Y. Y., Production data evaluation analysis model: A case study of broaching machine, Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute ofEngineers,Series A/Chung-kuo Kung Ch`eng Hsuch K`an, vol.44 no.7 pp.673-682
2021 陳坤盛(Kun-Sheng Chen)、Huang, T, H.(Huang, T, H.)*, A fuzzy evaluation model aimed at smaller-the-better-type quality characteristics, Mathematics, vol.9 no.19 pp.2513-
2021 Li, M.、Lin, L. Y.、陳坤盛(Kun-Sheng Chen)*、Hsu, T. H., Novel service efficiency evaluation and management model, Applied Sciences-Basel, vol.11 no.20 pp.9395-
2021 陳坤盛(Kun-Sheng Chen)、Chang, T. C.(Chang, T. C.)*, A modified approach for Six Sigma quality assessment of product with multiple characteristics in intelligent manufacturing environments, JOURNAL OF TESTING AND EVALUATION, vol.49 no.5 pp.3035-3053
2021 陳坤盛(Kun-Sheng Chen)、Chen, S. C.、Hsu, C. H.(Hsu, C. H.)*、Chen, W. Z., Statistical hypothesis testing for asymmetric tolerance index, Applied Sciences-Basel, vol.11 no.14 pp.6249-
2021 陳坤盛(Kun-Sheng Chen)、Yu, C. M.(Yu, C. M.)*, Dual dimensional fuzzy testing based on the upper confidence limits for supplier selection, JOURNAL OF INTELLIGENT & FUZZY SYSTEMS, vol.40 no.6 pp.11145-11158
2021 陳坤盛(Kun-Sheng Chen)、Chung, L.、Chang, T. C., Developing a quality-based supplier selection model from the buying company perspective, Quality Technology and Quantitative Management, vol.18 no.3 pp.267-284
2021 陳坤盛(Kun-Sheng Chen)、Chen, S. C.、Hsu, T. H.(Hsu, T. H.)*、Lin, M. Y.、Wu, C. F.,, Fuzzy evaluation model of process improvement capability with costs consideration, Applied Sciences-Basel, vol.11 no.10 pp.4344-
2021 Li, M.、陳坤盛(Kun-Sheng Chen)、Yu, C. M.、Yang, C. M., A fuzzy evaluation decision model for the ratio operating performance index, Mathematics, vol.9 no.3 pp.262-
2020 陳坤盛(Kun-Sheng Chen)、Huang, C. T.、Chang, T. C., Decision-making for the selection of suppliers based on the process quality assessment, International Journal of Reliability, Quality and Safety Engineering, vol.27 no.6 pp.2050016-1-205001
2020 W. J. Luo、陳坤盛(Kun-Sheng Chen)*, The fuzzy process quality evaluation model for the STB quality characteristic of machining, Applied Sciences-Basel, vol.10 pp.8272-
2020 陳坤盛(Kun-Sheng Chen), Lifetime performance index of electronic products, MICROELECTRONICS RELIABILITY, vol.113 pp.113941-
2020 陳坤盛, Selecting an optimal contractor for production outsourcing: A case study of gear grinding, Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch`eng Hsuch K`an, vol.43 no.5 pp.415-424
2020 陳坤盛(Kun-Sheng Chen), Construction and fuzzy hypothesis testing of Taguchi Six Sigma quality index, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, vol.58 no.10 pp.3110-3125
2020 YU, C. M.、陳坤盛(Kun-Sheng Chen)*, Fuzzy supplier selection method based on smaller-the-better quality characteristic, Applied Sciences-Basel, vol.10 no.10 pp.3635-
2020 C. H. Wang、陳坤盛(Kun-Sheng Chen)*, New process yield index of asymmetric tolerances for bootstrap method and Six Sigma approach, INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, vol.219 pp.216-223
2020 YU, C. H.、陳坤盛(Kun-Sheng Chen)*, Constructing fuzzy hypothesis methods to determine critical-to-quality service items, Mathematics, vol.8 no.4 pp.573-
2020 YU, C. M.、陳坤盛(Kun-Sheng Chen), Process-quality evaluation for wire bonding with multiple gold wires, IEEE Access, vol.8 no.1 pp.106075-106082
2020 陳坤盛(Kun-Sheng Chen), Evaluating the environmental protection strategy of a printed circuit board manufacturer using a Tw fuzzy importance performance analysis with Google Trends, EXPERT SYSTEMS WITH APPLICATIONS, vol.156 pp.113483-
2020 王靖欣(Wang, Ching-Hsin)、陳坤盛(Kun-Sheng Chen)*, New process yield index of asymmetric tolerances for the bootstrap method and Six Sigma Approach, INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, vol.219 pp.216-223
2019 Chun-Ming Yang、陳坤盛*, Two-phase selection framework that considers production costs of suppliers and quality requirements of buyers Production data analysis system using novel process capability indices-based circular economy, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, vol.57 no.20 pp.6351-6368
2019 林國平、陳坤盛*, Production data analysis system using novel process capability indices-based circular economy, INDUSTRIAL MANAGEMENT & DATA SYSTEMS, vol.119 no.8 pp.1655-1668
2019 Tsang-Chuan Chang、陳坤盛*, Testing process quality of wire bonding with multiple gold wires from viewpoint of producers, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, vol.57 no.17 pp.5400-5413
2019 陳坤盛(Kun-Sheng Chen), Developing an outsourcing partner selection model for process with two-sided specification using capability index and manufacturing time performance index, International Journal of Reliability, Quality and Safety Engineering, vol.26 no.3 pp.1950015-1-16
2019 陳坤盛(Kun-Sheng Chen), Developing one-sided specification six-sigma fuzzy quality index and testing model to measure the process performance of fuzzy information, INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, vol.208 pp.560-565
2019 Chun-Ming Yang、陳坤盛*, Developing a multi-quality characteristic analysis model to measure the quality of quick-release bicycle hubs, JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS, vol.42 no.4 pp.309-318
2019 陳坤盛(Kun-Sheng Chen)*, Two-tailed Buckley fuzzy testing for operating performance index, JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS, vol.361 pp.55-63
2019 Ching-Hsin Wang、陳坤盛(Kun-Sheng Chen)*, Lean Six Sigma applied to process performance and improvement model for the development of electric scooter water-cooling green motor assembly, PRODUCTION PLANNING & CONTROL, vol.30 no.5-6 pp.400-412
2019 陳坤盛(Kun-Sheng Chen), Development and application of performance improvement verification model: A case study of an e-learning system, TOTAL QUALITY MANAGEMENT & BUSINESS EXCELLENCE, vol.30 no.7-8 pp.936-952
2019 CHUN-MING YANG、林國平(Kuo-Ping Lin)、陳坤盛(Kun-Sheng Chen)*, Confidence interval based fuzzy evaluation model for an integrated-circuit packaging molding process, Applied Sciences-Basel, vol.9 no.13 pp.2623-
2019 陳坤盛(Kun-Sheng Chen), Quality capability assessment for thin-film chip resistor, IEEE Access, vol.7 no.1 pp.92511-92516
2019 陳坤盛(Kun-Sheng Chen), A model for evaluating the performance of the bearing manufacturing process, Applied Sciences-Basel, vol.9 no.15 pp.3105-
2018 陳坤盛(Kun-Sheng Chen), Developing a performance index with a Poisson process and an exponential distribution for operations management and continuous improvement, JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS